Chainmaille Weave Ideas: Base Metal T16 – 16g 3/8″ (9.5 mm)

Wondering what chainmaille project to tackle with those size T16 – 16g 3/8″ (9.5 mm) rings? Check out the post below for weave ideas as well as where to get instructions for each one.

Weave Ideas: Base Metal T16

Wire Gauge = 16ga SWG (0.062″ / 1.6 mm)
Inner Diameter = 3/8″ (9.5 mm)

Hint: Use our Ring Picker tool to quickly see every metal and color we have available and in stock for this size!

==================================================================

These samples use our base metal jump rings (aluminum, copper, jewelry brass and anodized aluminum.)

Aspect Ratio approximately 6.5

“rpi” = rings per inch.
Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

European 8-1

17 rpi

==================================================================

Full Persian

12 rpi

Full Persian 6-1 (Foxtail) PDF

(currently in sale section)
==================================================================

Möbiused Rosettes

16 rpi

Möbiused Rosettes PDF + Hardcopy Instructions

==================================================================