November

2011

Chainmaille Weave Ideas: Precious Metal I14 – 14ga 13/64″ (5.2 mm)

Posted by Jenna | No Comments | Read More / Add Comment

Wondering what chainmaille project to tackle with those size I14 – 14g 13/64″ (5.2 mm) rings? Check out the post below for weave ideas as well as where to get instructions for each one.

Weave Ideas: Precious Metal I14

Wire Gauge = 14ga AWG (0.064″ / 1.63 mm )
Inner Diameter = 13/64″ (5.2 mm)

Hint: Use our Ring Picker tool to quickly see every metal and color we have available and in stock for this size!

==================================================================

These samples use our niobium jump rings.

“rpi” = rings per inch.
Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

2-Connector Byzantine (I14 + J14 SILV)

I14 – 6 rpi

J14 – 12 rpi

Box/Byzantine PDF
(currently in sale section)
CHAINED book
==================================================================

Celtic Visions (I14 + S14 SILV)

I14 – 10 rpi

S14 – 6 rpi

Celtic Visions PDF + Hardcopy Instructions
==================================================================

November

26

2011

Chainmaille Weave Ideas: Base Metal P16 – 16ga 5/16″ (7.9 mm)

Posted by Jenna | No Comments | Read More / Add Comment

Wondering what chainmaille project to tackle with those size P16 – 16ga 5/16″ (7.9 mm) rings? Check out the post below for weave ideas as well as where to get instructions for each one.

Weave Ideas: Base Metal P16

Wire Gauge = 16ga SWG (0.062″ / 1.6 mm)
Inner Diameter = 5/16″ (7.9 mm)

Hint: Use our Ring Picker tool to quickly see every metal and color we have available and in stock for this size!

==================================================================

These samples use our base metal jump rings (aluminum, copper, jewelry brass and anodized aluminum.)

Aspect Ratio approximately 5.4

“rpi” = rings per inch.
Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

Double Spiral

14 rpi

Double Spiral PDF
(FREE!)
==================================================================

European 6-1

18 rpi

European 6-1 PDF

(currently in sale section)
==================================================================

Full Persian

16 rpi

Full Persian 6-1 (Foxtail) PDF

(currently in sale section)
==================================================================

Half Persian 4-1

14 rpi

Half Persian 3-1 and Half Persian 4-1 (Flat Persian, Snake Chain) PDF
(currently in sale section)
==================================================================

Wiggle

6 rpi

Wiggle PDF
(FREE!)
==================================================================

November

25

2011

Chainmaille Weave Ideas: Precious Metal I16 – 16g 13/64″ (5.2 mm)

Posted by Jenna | 5 Comments | Read More / Add Comment

Wondering what chainmaille project to tackle with those size I16 – 16g 13/64″ (5.2 mm) rings? Check out the post below for weave ideas as well as where to get instructions for each one.

Weave Ideas: Precious Metal I16

Wire Gauge = 16ga AWG (0.051″ / 1.291 mm )
Inner Diameter = 13/64″ (5.2 mm)

Hint: Use our Ring Picker tool to quickly see every metal and color we have available and in stock for this size!

==================================================================

These samples use our niobium jump rings.

“rpi” = rings per inch.
Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

Box

26 rpi

Box/Byzantine PDF
(currently in sale section)
CHAINED book

==================================================================

Celtic Visions (I16+O14 SILV)

I16 – 10 rpi

O14 – 6 rpi

Celtic Visions PDF + Hardcopy Instructions

==================================================================

European 4-1

25 rpi

Mesh & Rosettes PDF + Hardcopy Instructions

DVD Vol 1
==================================================================

Half Persian 3-1

12 rpi

Half Persian 3-1 and Half Persian 4-1 (Flat Persian, Snake Chain) PDF
(currently in sale section)

==================================================================

Japanese Lace (I16+D20)

2 row

I16 – 12 rpi

D20 – 24 rpi

3 row

I16 – 19 rpi

D20 – 38 rpi

Japanese Lace PDF + Hardcopy Instructions

CHAINED book

==================================================================

Rosettes

19 rpi

Mesh & Rosettes PDF + Hardcopy Instructions

==================================================================

Roundmaille

36 rpi

Open Round/Turkish Round PDF (currently in sale section!)

==================================================================

Wiggle

11 rpi

Wiggle PDF
(FREE!)

==================================================================

November

23

2011

We’re thankful for YOU!

Posted by Jenna | 4 Comments | Read More / Add Comment

It’s (almost) Thanksgiving – what better time to let you all know how thankful we are for you?! The truth is, we’re really thankful for our awesome customers every day of the year. Not only are you literally the reason we are able to do everything we do, but you are a continuous source of inspiration, community, and learning.

Thank You.

Thank you for your constant words of encouragement and appreciation.
Thank you for believing in what we do as much as we do.
Thank you for having patience when we don’t get something right the first time or you have to wait on an order.
Thank you for recommending us to friends.
Thank you for keeping things exciting for us.
Thank you for reminding us why what we do matters.
Thank you for honest feedback.
Thank you for your creativity.

Most of all, thank you for contributing to the success of our small business.

November

23

2011

Chainmaille Weave Ideas: Base Metal L16 – 16g 1/4″ (6.4 mm)

Posted by Jenna | No Comments | Read More / Add Comment

Wondering what chainmaille project to tackle with those size L16 – 16g 1/4″ (6.4mm) rings? Check out the post below for weave ideas as well as where to get instructions for each one.

Weave Ideas: Base Metal L16

Wire Gauge = 16ga SWG (0.062″ / 1.6 mm)
Inner Diameter = 1/4″ (6.4 mm)

Hint: Use our Ring Picker tool to quickly see every metal and color we have available and in stock for this size!

==================================================================

These samples use our base metal jump rings (aluminum, copper, jewelry brass and anodized aluminum.)

Aspect Ratio approximately 4.2

“rpi” = rings per inch.
Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

3-Connector Byzantine

16 rpi

Box/Byzantine PDF
(currently in sale section)
CHAINED book
==================================================================

Box

20 rpi

Box/Byzantine PDF
(currently in sale section)
CHAINED book
==================================================================

European 4-1

23 rpi

Mesh & Rosettes PDF + Hardcopy Instructions

DVD Vol 1
==================================================================

Half Persian 3-1

10 rpi

Half Persian 3-1 and Half Persian 4-1 (Flat Persian, Snake Chain) PDF
(currently in sale section)
==================================================================

Open Round

15 rpi

Open Round/Turkish Round PDF
(currently in sale section)
==================================================================

Shaggy Loops

12 rpi

Shaggy Loops PDF
(FREE!)
==================================================================

Wiggle

9 rpi

Wiggle PDF
(FREE!)
==================================================================

Weave Ideas: Precious Metal I14

These samples use our niobium jump rings.

Aspect Ratio = 3.3

“rpi” = rings per inch. Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

2-Connector Byzantine (I14 + J14 SILV)

I14 – 6 rpi

J14 – 12 rpi

Celtic Visions (I14 + S14 SILV)

I14 – 10 rpi

S14 – 6 rpi

Weave Ideas: Base Metal P16

These samples use our base metal jump rings (aluminum, copper, jewelry brass and anodized aluminum.)

Aspect Ratio approximately 5.4

“rpi” = rings per inch. Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

Double Spiral

14 rpi

European 6-1

18 rpi

Full Persian

16 rpi

Half Persian 4-1

14 rpi

Wiggle

6 rpi

Weave Ideas: Precious Metal I16

These samples use our niobium jump rings.

Aspect Ratio = 4.25

“rpi” = rings per inch. Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

Box

26 rpi

Celtic Visions (I16+O14 SILV)

I16 – 10 rpi

O14 – 6 rpi

European 4-1

25 rpi

Half Persian 3-1

12 rpi

Japanese Lace (I16+D20)

2 row

I16 – 12 rpi

D20 – 24 rpi

3 row

I16 – 19 rpi

D20 – 38 rpi

Rosettes

19 rpi

Roundmaille

36 rpi

Wiggle

11 rpi

Thank You.

Weave Ideas: Base Metal L16

These samples use our base metal jump rings (aluminum, copper, jewelry brass and anodized aluminum.)

Aspect Ratio approximately 4.2

“rpi” = rings per inch. Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

3-Connector Byzantine

16 rpi

Box

20 rpi

European 4-1

23 rpi

Half Persian 3-1

10 rpi

Open Round

15 rpi

Shaggy Loops

12 rpi

Wiggle

9 rpi

Recent Posts

Archives

Categories

Blog Tools

Contact

Affiliate Links

“rpi” = rings per inch.
Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

“rpi” = rings per inch.
Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

“rpi” = rings per inch.
Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.

“rpi” = rings per inch.
Use this number to help you figure out how many rings you’ll need for your project. Simply multiply it by the desired length (in inches) for your final piece.